Intelligent Transfer Switch

AE-4_01
AE-4_07
AE-4_02
AE-4_03
AE-4_04
AE-4_05
AE-4_06
AE-4_01
AE-4_07
AE-4_02
AE-4_03
AE-4_04
AE-4_05
AE-4_06

Intelligent Transfer Switch

LCM3000 Series
iLS1500 Series

Up To 24000 W

Advanced Energy’s Artesyn Intelligent Transfer Switch (iTS™) is designed for use with iHP and LCM4000 product families​ and can be used in any application needing power switched to different loads during a 24-hour period (i.e. horticulture, burn-in, test and measurement, etc.). The iTS has a built-in PSU to supply power to the relays and MCU module. It is designed to operate with 2 phases of a 3-phase input mains up to 480 VAC nominal, or standard phase and neutral of single-phase mains.​

SKU: AE-4 Category:
  • Specifications

Description


Features Benefits
• Modular 8 channel A:B switch​ • Natural convection cooled (fanless)​
• Standard 19″ rack with reversable mounting tabs​ • Cloud based user-configurable GUI​
• Up to 16 racks are addressable from one control node​ • Configurable baud rate​
• 100% digital control​ • Field upgradeable firmware​
• Digital communication via RS485 (ModbusRTU)​ • Intelligent zero current switching when used with Artesyn devices
• MTBF > 400,000 hours, 10 years minimum lifetime ​
• Five-year warranty

Related Applications

Datasheet URL
Click_Here_Download

Associated Part Numbers

Related Products

  •
    Inquiry now
    Quick View

    LCM3000 Series

    3000 W AC-DC Power Supply

    The cost-effective LCM3000 series AC-DC single-output enclosed series provides up to 3000 W, with medical and industrial safety approvals. These forced-air bulk front end products offer 12, 24, 36, or 48 V configurable nominal outputs, ±25% output adjustability, and 250 A max current. A standard 5 V/2 A housekeeping output enables OEM standby functions even when the equipment is nominally off. Applications: industrial test and measurement equipment, robotics, laser-carving machines, and factory automation; non-patient contact/non-patient critical medical, dental, and laboratory applications; telecom/datacom equipment; battery charging; and driving LEDs.
    Inquiry now
    Quick View
  •
    Inquiry now
    Quick View

    ADQ600 Series

    12 V 600 W 1/4 Brick

    The ADQ600 series quarter-brick isolated DC-DC converter produces a single fully regulated 12 V output. Rated at 600 W, the converter can deliver up to 50 A output current and has no minimum load requirement. It has an input voltage range of 40 to 60 V and is primarily designed for use with standard 48 V supplies in computing and server applications, as well as regulated 48 V supplies in telecommunications equipment. ADQ600 series converters have an ultra high efficiency of typically 95.6% at full load and can operate over an ambient temperature range of -40 to 85˚C, making them an ideal choice for the isolated converter in a distributed power architecture supplying power to non-isolated converters.
    Inquiry now
    Quick View
  •
    Inquiry now
    Quick View

    ADH700 Series

    700 W 1/2 Brick

    The ADH700 series half-brick isolated DC-DC converter provides a single regulated 28 V/25 A or 50 V/14 A low-noise 700 W output with >95% efficiency at half load. With an input range of 36 to 75 VDC, the series is designed primarily for standard 48 V telecom equipment, such as remote radio head (RRH) applications. A fixed 280 kHz switching frequency minimizes external EMI filtering requirements. An open-frame design with an aluminum thermal baseplate is optimized for conduction or forced air cooling. You can operate the ADH700 converters over -40 to +85˚C ambient and with full power delivery up to a baseplate temperature of 100˚C. Helping you meet demanding inter-board spacing requirements, the converters feature an installed height of just 0.5 inch (12.7 mm).
    Inquiry now
    Quick View
  •
    Inquiry now
    Quick View

    iLS600 Series

    Intelligent Laboratory Power 600 W Bench Programmable Power Supplies

    Advanced Energy’s Artesyn iLS600 series are programmable DC power supplies with a single output that offers output power to 600 W. With 12-bit D/A & A/D converters embedded, the power supplies come with the capability of reporting voltage and current very accurately. The iLS600 series provide convenient digital rotary controls for voltage and current adjustment and the power supplies come with front ports that allow remote control via USB, Ethernet, and analog control inputs. iLS600 series are LXI certified, details for using this interface can be found in our Programming Manual.
    Inquiry now
    Quick View
  •
    Inquiry now
    Quick View

    ADO500/ADO550 Series

    550 W Eighth-Brick DC-DC Converters

    An ultra-high full-load efficiency of 96.5% and operating temperature range of -20 to +85˚C ambient make the ADO500 and ADO550 series ideally suited for the isolated converter in distributed power architectures supplying non-isolated converters, such as in 48 V supplies in computing and communications equipment. The eighth-brick isolated DC-DC converters offer single fully regulated 10 V, 500/550 W output, an input range of 45 to 56 V, and no minimum load. The series offers enhanced pre-bias start-up capability and allows for paralleling two converters with automatic droop method of current sharing. A 185 kHz switching frequency reduces EMI filtering needs. Open-frame models have an installed height of 0.48 inch (12.2 mm) and baseplate versions 0.57 inch (14.5 mm) to meet your tight inter-board spacing constraints.
    Inquiry now
    Quick View
  •
    Inquiry now
    Quick View

    iLS600-R Series

    Intelligent Laboratory Power 600 W Bench Programmable Power Supplies

    Advanced Energy’s Artesyn iLS600-R series are programmable DC power supplies with a single output that offers output power to 600 W. With 12-bit D/A & A/D converters embedded, the power supplies come with the capability of reporting voltage and current very accurately. The iLS600-R series provide convenient digital rotary controls for voltage and current adjustment and the power supplies also come with rear ports that allow remote control via USB, Ethernet, and analog control inputs. iLS600-R series are LXI certified, details for using this interface can be found in our Programming Manual.
    Inquiry now
    Quick View
  •
    Inquiry now
    Quick View

    ADH1300 Series

    1300 W Half-Brick DC-DC Converter

    The ADH1300 series half-brick isolated DC-DC converter provides a single regulated 28 V/46.5 A low-noise 1300 W output with > 95% efficiency at half load. With an input range of 36 to 75 VDC, the series is designed primarily for standard 48 V telecom equipment, such as remote radio head (RRH) applications. A fixed 300 kHz switching frequency minimizes external EMI filtering requirements. An open-frame design with an aluminum thermal baseplate is optimized for conduction or forced air cooling. You can operate the ADH1300 converters over -40 to +85˚C ambient and with full power delivery up to a baseplate temperature of 100˚C. The unit follows the standard 1/2 brick dimensions of 2.3" (57.9 mm) * 2.4" (61 mm) and an installed height of just 0.5" (12.7 mm).
    Inquiry now
    Quick View
  •
    Inquiry now
    Quick View

    ADC100M Series

    100 A & 120 A PSA Main DC-DC Converter

    Advanced Energy’s Artesyn ADC100M-04 is a Direct Conversion PSA main unit. With the ever increasing power demands of server processors and associated memory devices, new power conversion design approaches need to be considered both at system and server level. The solution to achieve the high power required is to move to a 48 V system with the power conversion design approaches of either distributed power conversion, or direct power conversion employed in the server. ADC100 series follow Power Stamp Alliance’s standard product footprint and functions that provide a standard modular board-mounted solution for power conversion for 48 Vin / 54 Vin to low voltage, high current applications.
    Inquiry now
    Quick View
  •
    Inquiry now
    Quick View

    iLS1500 Series

    Intelligent Laboratory Power 1500 W Rack Programmable Power Supplies

    Advanced Energy’s Artesyn iLS1500 series is a programmable DC power supply with a single 1500 W output. With 12-bit D/A & A/D converters embedded, the power supplies come with the capability of reporting voltage and current very accurately. The iLS1500 series provides convenient dynamic rotary controls for voltage and current adjustment. The power supplies also come with rear ports that allow remote control via USB, Ethernet, and analog control inputs and they are designed to offer either bench use or rack mounting. The iLS1500 series is LXI certified, details for using this interface can be found in our Programming Manual.
    Inquiry now
    Quick View
  •
    Inquiry now
    Quick View

    ADO300 Series

    300 W Digital Interface 1/8th Brick

    Designed for use with standard 48 V supplies in computing and server applications as well as regulated 48 V supplies in communications equipment, the 300 W ADO300 series of eighth-brick isolated DC-DC converters provides single fully regulated 3.3, 5, or 12 VDC output. With an ultra-high 95.2% full-load efficiency, the series offers an input voltage range of 36 to 75 VDC and has no minimum load requirement. Choose from digital and analog interface options in industry standard Distributed-power Open Standards Alliance (DOSA) footprints to meet your control/monitoring and flexibility goals.
    Inquiry now
    Quick View